Programming Dynamixel servos

From IxD Studio
Revision as of 17:33, 25 April 2026 by Studio Director (talk | contribs) (Created page with "= Dynamixel Wizard Software = Dynamixel servos have an assigned ID that ranges from 0-252. In order to control each servo individually when interconnected in a daisy-chain manner, each servo must have a unique ID. = OpenRB-150 = To assign unique ID to the servos we use the Dynamixel Wizard software and the OpenRB-150 board. After installation of the OpenRB-150 board using the Arduino board manager, we can find the example "usb_2_dynamixel". We upload via the example t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Dynamixel Wizard Software

Dynamixel servos have an assigned ID that ranges from 0-252. In order to control each servo individually when interconnected in a daisy-chain manner, each servo must have a unique ID.

OpenRB-150

To assign unique ID to the servos we use the Dynamixel Wizard software and the OpenRB-150 board. After installation of the OpenRB-150 board using the Arduino board manager, we can find the example "usb_2_dynamixel". We upload via the example to the board, then quit the Arduino IDE and open the Dynamixel Wizard software.

Retrieved from "https://studio.cse.chalmers.se/mediawiki/index.php?title=Programming_Dynamixel_servos&oldid=143"